+86731 82299365
No.9 Gangzhong West Road. Changde, China
Contact Us
Links:
© 2018 Changde Water Meter All Rights Reserved 湘ICP备16003254号-1 Powered by www.300.cn CHANGSHA
Products
Products
Turbine flow meter
HLY series turbine flow meter is a kind of intelligent integration by using the latest international digital integrated technology and according to the actual needs of domestic industrial automatic control research and development of a new generation of high quality intelligent instrument.Piezoelectric crystals as detecting element stress testing new type intelligent turbine flow meter.This instrument has the range than wide, high precision, small pressure loss, good medium generality, and the flow rate is proportional to the pulse output, current signal, the RS - 485 communication, and computer combination conveniently.This Instrument has the characteristics of simple structure, high universality and high stability, respectively, are two kinds of active, passive, passive type does not need outer power supply built-in 3.6 V batteries, battery life more than three years.The liquid crystal display meter, and instantaneous flow rate and flow accumulated, real-time temperature and pressure in real time.Intelligent turbine flow meter can through internal procedure, multi-point linear compensation for traffic signal, through the intelligent flow meter multi-point linear compensation, ensure accuracy of flow meter range segment at each point.
HLY series integrated turbine flow meter can be with our factory production of SXL general flow show that integrating instrument.Can also form a complete set with the computer of the quality of the high precision flow or heat flow detection measurement system.
The Feature of Mini Turbine Water Flow Meter
1. High accuracy, generally up to ± 1% R, ± 0.5% R of mini turbine water flow meter;
2. Repeatable, such as frequent calibration of mini turbine water flow meter.
3.All valid data after poweroff for 10 years is not lost.
4.The widely range of digital water flow meter, medium and large caliber up to 1:20.
5.Compact and lightweight construction, easy installation .
6.The application of coercive measure.easily made high-pressure type instrument.
Performance |
|
Repeatability: |
±0.2% |
Accuracy: |
Standard: ±1% of reading; |
|
Optional: ±0.5% of reading |
Wetted Components |
|
Housing: |
Standard - 304 Stainless Steel |
|
Optional - 316 Stainless Steel |
Bearings and Shaft: |
Tungsten Carbide |
Rotor: |
Standard - 2Cr13 Stainless Steel |
|
(Optional Alloy CD4Mcu) |
Retaining Rings: |
316 Stainless Steel |
Output Signal: (Where applicable) |
|
Sensor: |
Pulse signal (Low Level: ≤0.8V; High Level: ≥8V) |
Transmitter: |
4 to 20 mA DC current signal |
Signal Transmission Distance: ≤1,000 m |
|
Electrical Connections: |
|
Basic Type: |
Hausman Connector or three-core cable |
Explosion Proof Type: |
ISO M20×1.5 Female |
Explosion Proof Level: |
|
Standard: |
None |
Optional: |
ExdIIBT6 |
Protection Level: |
IP65 |
Ambient: |
|
Temperature: |
-10°C to 55°C |
Pres: |
86 to 106 KPa |
Relative Humidity: |
5% to 90% |
Power Supply: |
|
Sensor: |
12V DC (Optional: 24V DC) |
Transmitter: |
24V DC |
Field Display Type B: |
Integral 3.2V Lithium Battery (Others available on request) |
Field Display Type C: |
24V DC |
Fluid Temperature and Pres: |
|
Temperature: |
-20°C to 110°C |
Pres: |
Fluid pres should be limited according to rating. |